HANDMADE SINKS

How to Choose a Suitable Drop-in sink?

A drop-in sink, also called top-mount, over-mount, or self-rimming sink is a basin that drops into a precut hole on the table and the rim of the sink sits on top of the table to support the weight of the sink. A drop-in sink is usually less expensive and it will work with any type of countertop. Therefore, this kind of sink is quite common and popular in daily life compared with its counterpart, the under-mount sink. Then how can we choose a good and suitable drop-in sink?

Consider the size of the space first before purchasing a drop-in sink. Generally speaking, it is not recommended to install a drop-in sink in space less than 70cm wide. Under the conditions, there are few categories of drop-in sinks to choose from and it is easier to cause a poor visual effect.

Besides, you need to consider the location of the water supply and drain in your room to choose the most suitable drop-in sink. Or else some unnecessary trouble may be caused. Relevant accessories, such as faucet, should also be included in your consideration and taken seriously.

Drop-in sinks come in a variety of materials, including stainless steel, cast iron, composite granite, natural stone, copper and so on. Stainless steel drop-in sinks or copper drop-in sinks would be a good choice if you prefer lighter materials. If you don’t have a particular preference, a ceramic drop-in sink would be a nice option. In general, a high-quality ceramic sink have glossy, smooth surface without any bubbles and pinholes. We can identify them simply by observing the surfaces and touching. The crisp knocking sound indicates that it is a good ceramic. Drop-in sinks are available in various colors. Different colors of the drop-in sinks that you choose may make your room look quite different. So it is recommended that you choose the color that is consistent with the overall style of your room.

How to Install an Under-mount Sink?

As the counterpart to drop-in sink, under-mount sink is also known as under-counter sink. This kind of sink is installed below the counter, resulting in no lip between the sink and the countertop. The installation of the under-mount sink is a key step for your convenient use in the future and it is not as complicated as some people imagine.

1. Prepare the required materials first, including countertop, an under-mount sink, cutting tool, adhesive, lining plate, and a splint.
2. Prepare a counter suitable for the under-mount sinks and cut a hole in the counter. A quartz table is generally used because it is wear-resistant and easy to take care of. The size of the hole should match the size of the sink and the side wall of the hole needs to be polished.
3. Align the under-mount sink with the hole in the counter and support it with brackets. Then make a stone strip lining using the cutting machine. Bond and fix the under-mount sink and counter with the marble glue and the stone lining plate.
4. You can also use the stone as the bottom splint. Dig a hole suitable for the size of the sink on the bottom splint, and glue the sink between the table panel and the bottom splint with marble glue, just like a sandwich.
5. To make the bond between the under-mount sink and the counter more firm, you can use the plate as the top support to support the sink.
6. Install the accessories of the under-mount sink, such as faucet, strainer and drainpipe. Then apply glass glue to the joint.
7. Conduct a test. Turn on the tap and fill the under-mount sink with water. This is a very crucial and necessary step to make sure the sink won’t leak and everything will run normally. If any problems happen with the under-mount sink, you should figure out the solution to make up for them immediately.

Farmhouse Sink, a Kind of Popular Sink at the Current Time

Farmhouse sinks are also known as apron sinks, which may come in different materials such as stainless steel and ceramic. Farmhouse sinks used to be seen in the country houses of England in the late 19th and early 20th century. This kind of sink is gaining increasing popularity at the current time because of its special features and advantages.

In comparison with other kinds of sinks, farmhouse sinks usually have deeper basins or bowls. Some people may complain that their sinks are not big enough to accommodate all the dishes that need to be cleaned. This feature of farmhouse sinks will bring them more space to accommodate larger stuff like pots and pans, refraining the users from worries about the space. Meanwhile, the depth of farmhouse sinks will also offer great help when soaking several pots and pans is needed in order to remove some stubborn stains.

Besides, the structures of farmhouse sinks are designed in a very user-friendly way. An apron-design according to the structure of the human body was involved in the front of the farmhouse sink. It sports a front that rides above the surrounding counter and juts out slightly from the supporting cabinetwork This not only makes it more convenient for users to bend over while doing dishes or cleaning vegetables and fruits, but also helps prevent damage to the cabinet as any water or suds that dripped over the lip of the farmhouse sink would drip to the floor rather than puddle on the wood of the cabinet table.

The gorgeous and elegant appearance of a farmhouse sink often brings people a feeling of high-end and decorates the kitchen in a luxurious way. In addition, the farmhouse sink has an innate rural flavor. Therefore, the farmhouse sink is definitely a good option for those who prefer country style. Nowadays, a farmhouse sink can be either single-bowl or double-bowl. People can make choices in terms of their own needs and preferences.

Pros and Cons of Handmade Sinks?

I believe that every household needs a sink, which is not only convenient for picking up water during cooking, but also convenient for us to clean the kitchen. In this regard, I would like to talk about some pros and cons of handmade sinks to help you learn more about them and have one more option when choosing a sink.

What are the pros of handmade sinks?
Generally speaking, handmade sinks are relatively thick, about 1.3mm-1.5mm. This is for the convenience of welding. Compared with drawn sinks, the thickness of handmade sinks is uniform and thus this kind of sink will certainly be more durable. Besides, handmade sinks are usually made of 304 stainless steel, which is environment-friendly and lead-free. In terms of the functionality of handmade sinks, they also have the advantages of impact and collision resistance, acid and alkali corrosion resistance and a unique odor prevention function. In terms of appearance, handmade sinks are straight up and down, with edges and corners and a stronger texture. This kind of sink comes in a lot of different surface treatments. So there’s no need to worry about the aesthetics of handmade sinks.

What are the cons of handmade sinks?
On one hand, handmade sinks require additional effort for cleaning and maintaining. The handmade sink does not have a steep toward the drain present in a sink and thus it’s easier to cause puddling or clogging here. To avoid damage and water spots, you may have to clean and wipe the sink basin after every use. On the other hand, handmade sinks are more expensive than ordinary sinks. That is because handmade sinks are intended to be labor-intensive and the production process is more cumbersome. The prices of handmade sinks may be a little difficult for ordinary people to accept. However, you will think the prices are reasonable only if you consider the good quality of handmade sinks.

Introduction to Nano Titanium Sinks

Nano titanium sinks are not very common in daily life. In fact, nano titanium sinks can also be counted as a good option when you are hesitating to choose a sink. In order to purchase a suitable sink, it’s necessary to learn about the strength and weakness of the nano titanium sink.

There are many advantages of nano titanium sinks.
1. Stain-resistant. The surface of the nano titanium sink is very smooth and fine, which makes this kind of sink not easy to absorb oil, dust and other dirty stuff. And the smooth surface is quite easy to clean.
2. Anti-static. Nano Titanium sink has a coating which can eliminate the phenomenon of static electricity.
3. Scratch-resistant. There will be a PVD coating on the surface of the nano titanium sink, which will protect the sink from scratch and abrasion.
4. Acid-, alkali- and heat-resistant.
5. Elegant appearance. A nano titanium sink may come in various colors, matching with various styles. And the color of the nano titanium sink is quite uniform and almost has no difference.

There are also some disadvantages of nano titanium sinks.
1. The PVD coating on the nano titanium sink is easy to come off when there is a scratch, even if it’s a small scratch.
2. A harmful raw material. This is a debatable point. Some people believe the PVD coating on the nano titanium sink is harmful to the human body. However, this is just a statement yet to be confirmed.

Some people may make a comparison between the nano titanium stainless steel sink and the 304-material stainless steel sink. Actually, the nano titanium stainless steel sink and the 304-material stainless steel sink have their own strengths and weaknesses. After fully understanding their respective features, you may make a good choice according to your own needs and preference. It is worth mentioning that the price of a nano titanium stainless steel sink is relatively higher than that of a 304-material stainless steel sink.

Pros and Cons of Single Bowl Kitchen Sinks

Nowadays, single bowl sinks are common and popular in the kitchen. Single bowl sinks come in a variety of finishes, materials, shapes and colors and picking a good single bowl sink is crucial for your future convenience. If you are still hesitant to choose a single bowl sink, take a look at the pros and cons of the single bowl sink as follows. This may help you make the right choice.

Pros of the single bowl sink:

1. Larger space
Unlike the double bowl sink which is divided into two small bowls, the single bowl sink has only one bowl which is much larger. Therefore, the single bowl sink can accommodate more dishes and makes it easier to find places to put large pots, pans and baking dishes.
2. Easy to install
The installation of the single bowl sink is not complicated at all. You don’t need extra consideration when installing a single bowl sink unless other aspects of the sink you choose (such as material, size or installation method) require specialized skills.
3. Plain appearance
The outlook of the single bowl sink is quite simple and thus the single bowl sink is a good option for those who love minimalist style.
4. Cheaper price
The design of the single bowl sink is simple and basic and thus the manufacturing costs of this kind of sink are relatively low. Therefore, compared with the double bowl sink, the single bowl sink is much cheaper.

Cons of the single bowl sink:

The biggest disadvantage of the single bowl sink is that all the cleaning works have to be finished in one bowl, so it’s difficult to dry the dishes. Besides, a partition design is missing in the single bowl sink and all residues from either doing dishes or cleaning vegetables will be built up in one bowl. The single bowl sink is less hygienic than the double bowl sink and may cause more waste of water.

Single Bowl Sink and Double Bowl Sink, Which One Should I Choose?

The Advantages of Symbolsink

Symbolsink, which was established in Malaysia, is a leading manufacturer of stainless steel sinks. Symbolsink has successfully established its reputation in the sink industry, especially in the North American market in virtue of not only its great passion for innovation and technology, but also its unique advantages. Its advantages can be roughly summarized as follows.

1. Automatic production machines and technology
Symbolsink has its own factories in Malaysia. The factories are equipped with the third-generation automated machines, which has improved the production capacity and lowered the production costs at the same time. Its stainless steel sink plant in Malaysia is free of anti-dumping duties and extra custom tariffs. All these factors contributed to the competitive prices of Symbolsink’s products.

2. Complete services
Symbolsink believes in long-term partnership, treating its customers as business partners. To have happy cooperation with the partners, it has set up a complete service system, providing satisfactory services through the whole process from production to shipment. In addition, customized services are available in Symbolsink.

3. Rich products of high quality
The products of Symbolsink can be divided into drop-in stainless steel sinks, undermount stainless steel sinks and vessel sinks based on the different ways of installation. In terms of the bowl of sinks, the products of Symbolsink can also be classified as single bowl sinks, double-bowl sinks and triple-bowl sinks. Full ranges of sizes of sinks are available in Symbolsink, such as the popular 50/50 sinks, 60/40 sinks, big and small single bowl sinks. All kinds of styles, such as Zero Radius sinks, apron front handmade sinks and so on, are also available in Symbolsink.

Moreover, Symbolsink always attaches great importance to the quality of products. The factories of Symbolsink are run under stringent regulations. All the products from Symbolsink will go through a strict inspection process before shipping out. The sinks from Symbolsink are cUPC certified and are specifically produced to meet North American standards.