+60-13 718 1888sink@symbolsink.com

Categories

Symbolsink Co Limited

Cel: +60-13 718 1888

E-mail: sink@symbolsink.com

Home > Exhibition > Content

Stainless Steel Sinks

Symbolsink Co Limited | Updated: May 19, 2017

In the selection of sinks, the first should consider the depth, some imported sinks are not suitable for domestic large pots, followed by size. The bottom of the moisture-proof measures are not to be omitted, and note the following points.

1: According to the cabinet counter size determines the size of the sink, because the sink can be installed on the table, Taichung, under the platform, so the size of the choice is also different.

2: The choice of stainless steel sink, the thickness of the material to moderate, too thin will affect the service life and strength of the flume, too thick easily damaged the washing utensils. In addition to the surface roughness of stainless steel, such as uneven description of poor quality.

3: Usually, the cleaning volume of a larger sink practical good, depth of about 20 centimeters better, so as to prevent splashing outside the splash.

4: The surface treatment of the sink to the matte smooth and practical, sink welding should be carefully observed, the weld must be evenly formed, no rust spots.

5: beautiful appearance, reasonable design, with overflow mouth as well.

p201703291349569230482.jpg