+60-13 718 1888sink@symbolsink.com

Categories

Symbolsink Co Limited

Cel: +60-13 718 1888

E-mail: sink@symbolsink.com

Home > Exhibition > Content

how to clean a 16 gauge stainless steel sink

Symbolsink Co Limited | Updated: May 25, 2017

1: If the kitchen sink is found to be blocked, should first turn off the faucet, must not try to water through the impact of the impurities in the sink down, waterproof cause more accumulation.

2: The sink should be blocked to see what it is blocked, in the general family, the kitchen under the water pipe is in the U-bend of the plug. Some water pipe will have a sewage screw, so just to unscrew it, and then use the steel wire will be on both sides. If still can not solve, can be under the water pipe all remove, in will all plastic connection mouth all unscrew, the internal impurities rinse and then assembled in turn, so that no more than half an hour can be done.

3: In the general household water pipes are greasy to plug, therefore, before the dredge can be burned a pot of water under the network will become better dredge. In the dredge can be used hand or hook and other tools to reach the drainage pipe, will be blocked in the dirt impurities to clear. If the first floor of the user, should check whether the outdoor sewer to push the leaves or silt caused by the drain plug.

p201704071503153160779.jpg

4: For the sink or sink drainage pipe see its no obvious blockage, can be used wet cloth overflow hole, and then use plunger to remove the sediment. If the plunger can not clear the blockage in it, you can place a bucket at the water bend of the drain, then twist down the pipe to clear the internal blockage.

5: If the blockage problem can not be solved, this means that these deposits are blocked in the depths of the knife, this should be timely notify the repairman to carry out treatment to prevent prolonged blockage of the pool water.